Home
Resources
Website Categories
Videos
Articles
Build a Model Layout
Blog
FAQ's
Find Wally Challenge
Support BCR
Recent Videos
Recent Articles
Kwik-E-Mark Laser Cutting Tutorial
Using the new xTool S1 40 watt diode laser cutter to build a really cool model of the Kwik-E-Mart from the Simpsons.
Ned Flanders House
Using a CO2 laser cutter and thin acrylic sheet to build a HO scale replica of the Flanders house
The Simpsons Diorama
Tutorial video describing the process of building a HO scale of the Simpsons House using the latest 3D printer technology from Anycubic. A fun diorama to sit on your desk!
Turing Your Layout into a Centerpiece
This is where the layout starts to transform into a focal point, the fascia and curtains help guide anyone looking at the layout towards the focal point which is the scenery and track. I also install the lights so we can actually see the model because once the roof section is complete not a lot of natural light will be able to get into the layout. Finally some foam is added between the tracks so that it's ready for scenery. It's exciting seeing the layout come to life and this was a big change!
Wiring a DCC Model Railroad
In this article and video I'll be guiding you through the process I've decided to use to wire the modular model railroad. This is not to say everyone must do it the same way, more so that this method works for me and there's a good chance it will work for you, especially if you are choosing to build a modular layout that needs to have the option to connect and disconnect the modules. This will make great wiring for a convention layout that will travel around to various train shows.
Laying Track for a Modular Railroad
In this article and video I'll be taking you on a step by step journey on how I lay track, specifically for joining modular model railroads together. It can be a challenge to get them to align perfectly however with the method I'm using in the video you should have no problems being able to lay good reliable track that keeps the trains on the track.
Contact
Members
Members
All Videos
Patreon Only Video
All Videos
Resin/Water
Scenery Basics
Special Effects
Structures
Bridges
Roads
Vehicles
Trees
Tools
Layout Construction
Find Wally
Includes Downloadable Material
Anycubic Photon – Ultimate detail 3D printing
3D printers have come a long way over the past few years and if you need extreme detail when 3D printing then you have to check out DLP 3D printers…
...
April 24, 2018
Building a Realistic Diorama - Australian Scenery Time Lapse
Watch as this small piece of foam is transformed into an awesome and very realistic HO scale diorama. This diorama was used to showcase the previous Gum Tree video.
...
March 22, 2018
Make Realistic Gum Trees using Seafoam - Fast & Easy
If you’ve never heard of super trees then you’ve been missing out for all these years… Super Trees also commonly known as Seafoam trees are a natural product that do an amazing job of making
...
March 15, 2018
An underground gold mine – Realistic Scenery Volume 9
If you’ve ever wondered what a gold mine looks like from the side then this video is for you! And while we’re at it I’ll step you through every stage of how this awesome diorama was built.
...
February 23, 2018
Moe’s Tavern – Laser Cutting Tutorial
In this tutorial I’ll show you the process for designing a building to be cut using a cheap laser cutter. In the video I design and cut the iconic ‘Moe’s Tavern’ from the Simpsons using
...
December 25, 2017
Static Grass Applicator – Professional Tools for Modelers
Building a DIY static grass applicator that can be powered by battery or from a 12 volt power supply. A must have for any modeller.
...
November 30, 2017
Previous
Next
Recent Uploads:
