Home
Resources
Website Categories
Videos
Articles
Build a Model Layout
Blog
FAQ's
Find Wally Challenge
Support BCR
Recent Videos
Recent Articles
Kwik-E-Mark Laser Cutting Tutorial
Using the new xTool S1 40 watt diode laser cutter to build a really cool model of the Kwik-E-Mart from the Simpsons.
Ned Flanders House
Using a CO2 laser cutter and thin acrylic sheet to build a HO scale replica of the Flanders house
The Simpsons Diorama
Tutorial video describing the process of building a HO scale of the Simpsons House using the latest 3D printer technology from Anycubic. A fun diorama to sit on your desk!
Turing Your Layout into a Centerpiece
This is where the layout starts to transform into a focal point, the fascia and curtains help guide anyone looking at the layout towards the focal point which is the scenery and track. I also install the lights so we can actually see the model because once the roof section is complete not a lot of natural light will be able to get into the layout. Finally some foam is added between the tracks so that it's ready for scenery. It's exciting seeing the layout come to life and this was a big change!
Wiring a DCC Model Railroad
In this article and video I'll be guiding you through the process I've decided to use to wire the modular model railroad. This is not to say everyone must do it the same way, more so that this method works for me and there's a good chance it will work for you, especially if you are choosing to build a modular layout that needs to have the option to connect and disconnect the modules. This will make great wiring for a convention layout that will travel around to various train shows.
Laying Track for a Modular Railroad
In this article and video I'll be taking you on a step by step journey on how I lay track, specifically for joining modular model railroads together. It can be a challenge to get them to align perfectly however with the method I'm using in the video you should have no problems being able to lay good reliable track that keeps the trains on the track.
Contact
Members
Members
Structures
Patreon Only Video
All Videos
Resin/Water
Scenery Basics
Special Effects
Structures
Bridges
Roads
Vehicles
Trees
Tools
Layout Construction
Find Wally
Includes Downloadable Material
Kwik-E-Mart
Using the new xTool S1 40 watt diode laser cutter to build a really cool model of the Kwik-E-Mart from the Simpsons.
...
June 14, 2024
Ned Flanders House
Using a CO2 laser cutter and thin acrylic sheet to build a HO scale replica of the Flanders house
...
March 26, 2024
The Simpsons - Diorama
Tutorial video describing the process of building a HO scale of the Simpsons House using the latest 3D printer technology from Anycubic. A fun diorama to sit on your desk!
...
February 23, 2024
Smokestack Magic: Building a Model Industrial Chimney with Working Smoke Effects
Using the Seuthe smoke generator to create an awesome industrial chimney that works! 😲
...
June 24, 2023
Paper Kits have Never Looked So Good – Realistic Scenery Vol.35
Building with laser cut high density cardboard, the results are fantastic! And when extra detail is added the realism is hard to beat.
...
December 16, 2022
Worst Block in Town Gets a Makeover – Realistic scenery Vol.33
I was a little hesitant to build using plaster, however I was pleasantly surprised when I started putting this kit together.
...
August 3, 2022
Next
Recent Uploads:
